JOIST HANGERS STANDARD, EXTERNAL FLANGES, HOT DIP GALVANIZED
Area of usage
ESSVE Joist hangers are designed to anchor timber beams and floor joists on the same level, both wood against wood and wood against concrete or masonry.
Made of 1.5 or 2.0 mm Hot dip galvanized sheet steel. Also available to order in stainless acid proof design, A4. The joist hangers are equipped with 5 mm holes for nails/screws and 9 mm or 11 mm holes for bolts. There is also a
7 mm hole on the beam hanger flange that comes under the beam. The joist hangers are available in two designs partly with external flanges,
Standard, partly with internal flanges, Type I.
Joist hangers are installed with e.g. ESSVE Anchor nails 4.0 mm or ESSVE Wood connector screws 5.0 mm. Joist hangers are fully nailed or
nailed partly depending on the load. Bolt holes and appropriate fasteners, see Fasteners, are used when installing
against solid or porous stone materials.