PRE PACKED FRAME SLEEVE CASE
Area of usage
In the PRE PACKED FRAME SLEEVE CASE you will find everything for a proper window or door installation with frames mainly of wood, but even for plastic- or aluminumframes depending on the frames presumption. Indu-Prog frame sleeve allows subsequent adjustment, which is a significant advantage when the frame, door or wall ”sags”.
The ESSVE Level screw is designed for use as an adjustable support for window frames. Adjustment is between 7-35 mm height. Each screw can be loaded with a maximum of 110 kg.
Indu-Prog Frame sleeve is a universal frame fixing, which is excellent to work with irrespective of the material the fixing is to be made in. The frame sleeve may either be prefitted on delivery of windows and/or doors or installed directly on site.
The wall material, which can be wood, concrete, steel, lightweight concrete, haydite, etc determines the choice of fixing, see the Installation instructions to select a suitable ESSVE fixing.
Indu-Prog frame sleeve is made of zinc and comes in two lengths, 28 and 38 mm. Dimension 28 mm is used for light doors and small windows with joints up to 13 mm and in aluminium or steel sections. Dimension 38 mm is used for massive doors, exterior doors and larger windows or joints up to 23 mm.
The outside Indu-Prog frame sleeve consists of a 20 mm hex plate and the M16 threaded fixing section. The M16 thread means the frame sleeve is ideal for aluminium and steel frames as well as frames of wood. Inside Indu-Prog Frame sleeve is an internal 10 mm hex.
Indu-Prog frame sleeve case content:
Mounting and adjustment tool InduProg
Frame screw drill DLT5 14/5MM
Ratchet wrench Indu/Programa
Frame sleeve InduProg 38mm 80pce
Pressure washer InduProg 40pce
Distance washer InduProg 50pce
Level screw 20pce
Adjustment tool Indu
Woodscrew InduProg 6X65 100pce
Frame sleeve InduProg 28mm 100pce
Pre-drilled 14 mm holes are required for installation in wooden frames. The grooves on the underside of the external hex plate allow countersinking in the frame. In thin pre-drilled aluminium sections, the ESSVE Indu-Prog Frame sleeve cuts its own thread. For steel frames, an M16 thread is required in the hole.