Product image
  • Laddar




Item 302334

Basic unit (price unit) PCE
Contents (per basic unit) 0.3 L
EAN 7317761878339

  • Area of usage

    Suitable for the fixation of facades, roofs, wood constructions, metal constructions; metal profile, columns, beams, consoles, railings, sanitary devices, cable trays, piping, post-installed rebar connection (reconstruction or reinforcement), etc.

    Handling and storage

    Storage: Store in a cold and dark place, storage temperature: from +5°C up to +25 °C

    Shelf life: Minimum 3 months for foil tubes.

    Cartridge can be reused up to the end of the shelf life by replacing the static mixer or resealing cartridge with the sealing cap

  • Description

    ESSVE ONE is a styrene-free vinylester resin that is delivered in a 2-component foil tube cartridge system. This high-performance product may be used in combination with a hand-, battery- or pneumatic tool and a static mixer. It was designed especially for the anchoring of threaded rods, reinforcing bars or internal threaded rod sleeves into concrete (also porous and light) as well as masonry. Based on the excellent viscous behaviour the application in hollow masonry material, in combination with a perforated plastic sleeve, is obvious. ESSVE ONE is characterised, by a huge range of applications with an installation temperature range 0°C up to +40°C and an application temperature range -40°C to +120°C after full curing. As well as by high chemical resistance for applications in extreme ambiences e.g. in swimming pools (chlorine) or in closeness to the sea (salt). The wide range of certificates, national and international approvals, allows nearly every application.

    Properties and benefits

    • European Technical Assessment for use in concrete (cracked and uncracked): ETA-18/0617
    • European Technical Assessment for use in masonry: ETA-18/0642
    • US-approval acc. to AC 308 for use in concrete (ICC-ES): ESR-2539
    • Certificated for drinking water applications acc. to NSF/ANSI Standard 61
    • Fire resistance test report: EBB 170019-24
    • Installation in water-filled bore holes (e.g. rain water)
    • Overhead application
    • Low odour
    • Suitable for attachment points with small edge- and anchor spacing distances due to an anchoring free of expansion forces (e.g. Compared to wedge anchors)
    • High chemical resistance
    • High bending and pressure strength

  • Assembly

    See ETA document

Fetching article information