|Replacement item||302330 CHEMICAL MORTAR - ECM 300ML|
|Alternative item||302240 CHEMICAL MORTAR ECM, 410 ML|
|302203 CHEMICAL MORTAR - ECM, 175ML|
|302233 CHEMICAL MORTAR - CM 300E|
|Basic unit (price unit)||PCE|
|Contents (per basic unit)||0.3 L|
ESSVE ECM Chemical Anchor is designed to install stud bolts, threaded rod or rebar in solid and porous materials
such as concrete, natural stone, brick, hollow block material and lightweight concrete. Lightweight concrete is also known as Leca,
Ytong, Siporex, blue concrete, etc.
ECM Chemical Anchor is a 2-component compound consisting of polyester resin, hardener and quartz sand. ECM Chemical Anchor is available
in three sizes, 175 ml, 300 ml and 410 ml. ECM 175 ml and ECM 300 ml are used with a standard cartridge gun
during application. For ECM 410 ml Cartridge Gun ECM 410 is used. ECM Chemical Anchor is not classed as health or environmental hazardous.
The products have no danger symbols and are both styrene and phthalate free, see the Safety Data Sheet. Empty packaging are
separated for waste collection as plastic.
The mixture of the compound and hardener is done in a specially designed mixing nozzle. Properly mixed chemical anchor should have a light grey colour.
The drill hole must always be brushed out and blown clean before applying the chemical anchor. Brushing and blowing out the drill hole must be repeated at least twice. During installation in solid or porous materials the drill diameter must be 2 mm larger than the fitting to be anchored. See Technical data.
When in hollow block material a Perfo-sleeve must be used, either cut in 1-metre lengths or a Pre-cut Perfo-sleeve. Perfo-sleeves are available in three sizes, suitable for M8-M16 bolts, see accessories Chemical anchor. When using the Perfo-sleeve the entire sleeve is filled with compound. Now press and turn the bolt and allow it to cure.
ECM Chemical anchor is not covered by the Swedish Work Environment Authority’s thermosetting plastic regulation (AFS 2005:18). The product may be used freely, provided that the installation is performed according to the instructions.