|Alternative item||302228 CHEMICAL MORTAR ECM, 300 ML|
|Basic unit (price unit)||PCE|
|Contents (per basic unit)||0.3 L|
ESSVE CM 300E Chemical Anchor is a European Approved chemical anchor, designed to install stud bolts or threaded rod
in solid and porous materials such as concrete, natural stone, brick, hollow block material and lightweight concrete. Lightweight concrete
is also known as Leca, Ytong, Siporex, blue concrete, etc.
ESSVE CM 300E Chemical Anchor is a 2-component epoxy acrylate compound .
CM 300E Chemical Anchor is used with a conventional cartridge gun for application.
CM 300E Chemical Anchor is not classified as health or environmental hazardous. The product has no danger symbols and are both styrene
and phthalate free, see the Safety Data Sheet.
The mixture of the compound and hardener is done in a specially designed mixing nozzle. Properly mixed chemical anchor should
have a light grey colour. The drill hole must always be brushed out and blown clean before applying the chemical anchor. Brushing and
blowing out the drill hole must be repeated at least twice. CM 300E Chemical Anchor can be used in both dry and wet drill holes.
For water-filled holes it is recommended to remove the water before applying the chemical anchor.
For installation in solid or porous materials the hole diameter must be 2 mm larger than the fitting to be anchored.
See Technical data When in hollow block material a Perfo-sleeve must be used, either cut in 1-metre
lengths or a Pre-cut Perfo-sleeve. Perfo-sleeves are available in three sizes, suitable for M8-M16 bolts, see Accessories
chemical anchors. When using the Perfo-sleeve the entire sleeve is filled with compound. Now press and turn the bolt and allow it to cure.
|Item name (long)||ANKARMASSA CM 300 E/ETA|
|Net weight||0.50 kg|
|Gross weight||0.58 kg|
|Quantity per pallet||480|