ESSDECK MAX DECKING SCREW, CORRSEAL

The screw is produced from hardened carbon steel with CorrSeal surface treatment. Fitted with TX-drive/bits.The screw has a milling fuction in the start of the thread wich eliminates the need of pre-drilling (except for exotic wood types), it has an upper clamping thread which generates a high clamping force to help straighten up scewed boards. When mounted the clamping thread helps keeping the board in place allowing a smaller head design with the same or higher holding power than traditional decking screws.

The head of the screw is cylindrical with milling ribs undernieth, to make a nice splinter free countersunk finish. One advantage with cylindrical head is that it does not push the boards to split at the ends.

ESSVE CorrSeal surface treatment is approved by SITAC nr 0075/05.

Read more about this product

General

  • Surface treatmentCorrSeal
  • ApprovalsCE, RISE CorrSeal
  • Application environmentOutdoors
  • Corrosion resistance classC4
  • Main MaterialsSteel
  • BrandKey10412

AreaOfUse

ESSVE Decking screw ESSDECK Max intended for the installation of decking timber, fencing etc to wooden joists/beams. The screw has a larger diameter compared to our standard classic decking screw and is produced from the same high performance steel grade as our construction screws and ESSDRIVE wood screw, in order to handle applications with higher demands, such as big deckings, deckings in several levels and deckings that are exposed to more movements.

Decking screws of stainless steel grade are always recommended for very harsh environment such as marine environment, pool areas, etc.

Decking screws of stainless steel grade and pre-drilling are always recommended when installing teak-like decking timber such as Cumaru, Kirai and others as well as Siberian Larch

Description

The screw is produced from hardened carbon steel with CorrSeal surface treatment. Fitted with TX-drive/bits.The screw has a milling fuction in the start of the thread wich eliminates the need of pre-drilling (except for exotic wood types), it has an upper clamping thread which generates a high clamping force to help straighten up scewed boards. When mounted the clamping thread helps keeping the board in place allowing a smaller head design with the same or higher holding power than traditional decking screws.

The head of the screw is cylindrical with milling ribs undernieth, to make a nice splinter free countersunk finish. One advantage with cylindrical head is that it does not push the boards to split at the ends.

ESSVE CorrSeal surface treatment is approved by SITAC nr 0075/05.

Assembly

Recommended rpm: 400-1200/min.

Article numberEANNamePackagePackage contentsBV
5035427317761887973ESSDECK MAX 4,8X42 CS-250PC 1 PC á 250 ST
5035427317761872450ESSDECK MAX 4,8X42 CS-250CAR8 CAR á 250 ST
5032427317761887966ESSDECK MAX 4,8X42 CS-1600PC 1 PC á 1600 ST
5035557317761887980ESSDECK MAX 4,8X55 CS-250PC 1 PC á 250 ST
5035557317761872467ESSDECK MAX 4,8X55 CS-250CAR8 CAR á 250 ST
5032557317761881032ESSDECK MAX 4,8X55 CSPC 1 PC á 1000 ST
5035757317761887997ESSDECK MAX 4,8X70 CS-250PC 1 PC á 250 ST
5035757317761872474ESSDECK MAX 4,8X70 CS-250CAR6 CAR á 250 ST
5032757317761881049ESSDECK MAX 4,8X70 CSPC 1 PC á 700 ST