ADJUSTABLE POST BASE TYPE B2, ZINC-PLATED
-
ESSVE Adjustable post base, type B2 low, is intended for use as a support of pillars and posts that are secured in concrete or stone. The adjustable post base is used when the possibility of height adjustment is required.
-
Adjustable post base Type B2 low consists of two square plates, one welded M20 bolt and a nut. The base plate 90x90 mm has a thickness of 6 mm and has 4 x Ø11.0 mm holes in each corner. In the centre of the plate is the welded M20 bolt. The upper plate 80x80 mm has a thickness of 8 mm and has 4 x Ø8.5 mm holes. Adjustable post base Type B2 low is designed for installation under pillars and posts against concrete/stone substrate.
Adjustable 40 mm, i.e. between 35 and 75 mm from the concrete surface to the lower edge of the pillar/post.
-
The centre of the post is predrilled with 20 mm and to a depth of min 120 mm. Adjustable Post base Type B2 low is installed on concrete/stone plate and on the post end with 4 bolts in each part before assembly.
Technical Specification
| Application environment | Outdoors |
| Corrosion resistance class | C3 |
| Surface treatment | Hot Dip Galvanized |
| Product Data Sheet |
|---|
| Product sheet |
| Technical Document |
| Load capacity B2-100 stanchion holder (EN) |