FIRE PUTTY
-
FireSeal is now launching a revolutionary fire kit, which through its wide area of application, simplifies fire sealing of the laid cables and pipes.
Fire Putty is intended for fire sealing with the fire class EI 60 to EI 120, for cables and metal pipes and wall constructions. It can very well be used for individual penetrations which require a simple and cost-effective solution. The soft properties of the material provide a simple modification of the fire seal which moreover facilitates removal of existing cables or installation of new.
-
Fire Putty is a silicone-based and non-hardening fire kit for cable and pipe penetration. In the event of a fire, a blockade of fire-resistant filling material is built up, which limits the passage of smoke and fire.
Fire Putty is listed in most environmental registers, which means that the product is not classified as being hazardous to the environment and health.
The long sustainability period of a whole 2 years makes FireSeal Fire Putty a product to have at hand if required.
-
A quick and easy installation that is performed in the following steps
- Make sure that the area is clean and dry
- The installation temperature should be between 5°C and 40°C
- Prepare the kit manually and use fingers or tools to press the kit in the opening around the cable or the pipe to a depth of minimum 2 cm.
- Repeat the procedure on the opposite side.
Technical Specification
| Approvals | CE, ETA |
| Approval |
|---|
| EC Certifikat_Fire Putty |
| Declaration of performance |
| DOP FS-SP2004-01 Fire Putty (EN) |