Construction screw-w WAF
-
ESSVE Wood screw WAF with 1 fiber cut in the tip and TX drive intended for most installation work in wood, chipboard, plywood, etc. both indoors and outdoors.
-
The wood screw WAF is produced in hardened steel with Silver CorrSeal C4 classified surface treatment for outdoor environments. The screw has a large head diameter which produces a very high clamping force during installation. The head also has a very low inset height, which can be an advantage during installation. It is equipped with 1 fibre cut in the tip, which gives the screw a low drive-in torque in wood and minimizes the risk of splintering.
On longer screw, there is an additional fiber cutting thread directly after the usual wood thread, this is to facilitate installation of longer and thicker screws.
The underside of the screw head is designed so that it fits properly when installed in beams and timber brackets.
ESSVE Wood screw WAF conforms to the CE requirement according to EN 14592. The screw is fitted with TX-bit drive.
-
Recommended rpm: 400-1200/min.
Technical Specification
| Application environment | Indoors, Outdoors |
| Approvals | CE |
| Head shape | Wafer head screw |
| Main Materials | Steel |
| Corrosion resistance class | C4 |
| Material | SAE10B21 |
| Material to attach | Wood |
| Surface treatment | CorrSeal |
| Declaration of performance |
|---|
| CS-W-(WAF)-10.0-CorrSeal (EN) |
| CS-W-(WAF)-6.0-CorrSeal (EN) |
| CS-W-(WAF)-8.0-CorrSeal (EN) |
| Technical Document |
| CorrSeal coating test report, class C4(15) according to EN 14592:2022 |
| Wood screw W (WAF)6-10mm.cs-en.pdf |