MOULDING/BASE/FLOOR SCREW SMALL HEAD FOR WOODEN AND STEEL JOISTS. YELLOW CHROMATE

The screw is produced in hardened carbon steel with yellow chromate surface treatment and
in yellow chromate or white finish. The screw has a counter-thread under the head to press mouldings base boards and solid pine flooring against the substrate.
The screw is fitted with a fibre cut in the point to reduce cracking and reduce the drive-in torque.
The small head gives a good countersink and the screw is fitted with TX-drive/bits.

Read more about this product

General

  • Main MaterialsSteel
  • Application environmentIndoors
  • Corrosion resistance classC1
  • Surface treatmentYellow zink plated

Area Of Use

ESSVEMoulding/base and floor screw designed for the installation of mouldings base boards and solid pine floors indoors,
against wood or steel joists. Drill capacity 0.4 – 0.9 mm.
For installation of harder wooden floors e.g. oak pre-drilling is necessary.

Description

The screw is produced in hardened carbon steel with yellow chromate surface treatment and
in yellow chromate or white finish. The screw has a counter-thread under the head to press mouldings base boards and solid pine flooring against the substrate.
The screw is fitted with a fibre cut in the point to reduce cracking and reduce the drive-in torque.
The small head gives a good countersink and the screw is fitted with TX-drive/bits.

Assembly

Recommended rpm: 400-1200/min.

Item numberEANNamePackagePackage contentsBV
4571457317761887911SKIRTING SCEW 3,9X42 YZP-100PC1 PC á 100 ST
4571457317761904205SKIRTING SCEW 3,9X42 YZP-100CAR6 CAR á 100 ST
5546427317761109501SKIRTING SCEW 3,9X42 YZPPC1 PC á 400 ST
5546427317761824800SKIRTING SCEW 3,9X42 YZPCAR8 CAR á 400 ST
4571557317761887928SKIRTING SCEW 3,9X57 YZP-100PC1 PC á 100 ST
4571557317761904212SKIRTING SCEW 3,9X57 YZP-100CAR6 CAR á 100 ST
5546577317761109518SKIRTING SCEW 3,9X57 YZPPC1 PC á 250 ST
5546577317761824817SKIRTING SCEW 3,9X57 YZPCAR6 CAR á 250 ST