ESSDECK MAX DECKING SCREW, CORRSEAL

The screw is produced from hardened carbon steel with CorrSeal surface treatment. Fitted with TX-drive/bits.The screw has a milling fuction in the start of the thread wich eliminates the need of pre-drilling (except for exotic wood types), it has an upper clamping thread which generates a high clamping force to help straighten up scewed boards. When mounted the clamping thread helps keeping the board in place allowing a smaller head design with the same or higher holding power than traditional decking screws.

The head of the screw is cylindrical with milling ribs undernieth, to make a nice splinter free countersunk finish. One advantage with cylindrical head is that it does not push the boards to split at the ends.

ESSVE CorrSeal surface treatment is approved by SITAC nr 0075/05.

Read more about this product

General

  • Main MaterialsSteel
  • ApprovalsCE, RISE CorrSeal
  • Application environmentOutdoors
  • Corrosion resistance classC4
  • Surface treatmentCorrSeal
  • Head shapeCylindrical head

Area Of Use

ESSVE Decking screw ESSDECK Max intended for the installation of decking timber, fencing etc to wooden joists/beams. The screw has a larger diameter compared to our standard classic decking screw and is produced from the same high performance steel grade as our construction screws and ESSDRIVE wood screw, in order to handle applications with higher demands, such as big deckings, deckings in several levels and deckings that are exposed to more movements.

Decking screws of stainless steel grade are always recommended for very harsh environment such as marine environment, pool areas, etc.

Decking screws of stainless steel grade and pre-drilling are always recommended when installing teak-like decking timber such as Cumaru, Kirai and others as well as Siberian Larch

Description

The screw is produced from hardened carbon steel with CorrSeal surface treatment. Fitted with TX-drive/bits.The screw has a milling fuction in the start of the thread wich eliminates the need of pre-drilling (except for exotic wood types), it has an upper clamping thread which generates a high clamping force to help straighten up scewed boards. When mounted the clamping thread helps keeping the board in place allowing a smaller head design with the same or higher holding power than traditional decking screws.

The head of the screw is cylindrical with milling ribs undernieth, to make a nice splinter free countersunk finish. One advantage with cylindrical head is that it does not push the boards to split at the ends.

ESSVE CorrSeal surface treatment is approved by SITAC nr 0075/05.

Assembly

Recommended rpm: 400-1200/min.

Item numberEANNamePackagePackage contentsBV
50354007317761917571ESSDECK MAX 4,8X42 CORRSEAL6 á 50 ST
50354007317761917540ESSDECK MAX 4,8X42 CORRSEAL1 á 50 ST
50354207317761872450ESSDECK MAX 4,8X42 CS-2508 á 250 ST
50354207317761887973ESSDECK MAX 4,8X42 CS-2501 á 250 ST
50324207317761887966ESSDECK MAX 4,8X42 CS-16001 á 1600 ST
50355007317761917588ESSDECK MAX 4,8X55 CORRSEAL6 á 50 ST
50355007317761917557ESSDECK MAX 4,8X55 CORRSEAL1 á 50 ST
50355507317761872467ESSDECK MAX 4,8X55 CS-2508 á 250 ST
50355507317761887980ESSDECK MAX 4,8X55 CS-2501 á 250 ST
50325507317761881032ESSDECK MAX 4,8X55 CS1 á 1000 ST
50357507317761872474ESSDECK MAX 4,8X75 CS-2506 á 250 ST
50357507317761887997ESSDECK MAX 4,8X75 CS-2501 á 250 ST
50327507317761881049ESSDECK MAX 4,8X75 CS1 á 700 ST