THREADED ROD 4.8, BRIGHT ZINC PLATED, 1 METRE, DIN 976

Threaded rod DIN 976 (previously DIN 975). The threaded rod is produced in hardened carbon steel with bright zinc plated surface treatment for indoor use and hot dip galvanised and A4-70 acid proof design for outdoor use.

Read more about this product

General

  • Corrosion resistance classC1
  • Surface treatmentZinc plated
  • Application environmentIndoors

Area Of Use

Threaded rod is used in all common types of installation where a threaded rod is required. The rod can be cut using a hacksaw or another tool into suitable length, remember that the threads can be easily damaged.

Description

Threaded rod DIN 976 (previously DIN 975). The threaded rod is produced in hardened carbon steel with bright zinc plated surface treatment for indoor use and hot dip galvanised and A4-70 acid proof design for outdoor use.

Assembly

In order for a bolted joint to work correctly and be able to counter static and varying loads for long periods the bolts must be preloaded, for example, by tightening with a given torque. Preloading must normally be held to such a level that the combined load in the bolt does not exceed the bolt material’s tensile yield limit. To install threaded rod in class 4.8 you should use a flat washer of at least 140 HV and for a threaded rod in class 8.8 a flat washer of at least HV 200 hardness should be used and it must be tightened with the torque as set out in the Technical data, table 2.

Item numberEANNamePackagePackage contentsBV
621111287317761224563THREADED ROD 4.8 M4X1M EZPPCS1 PCS á 1 ST
621111307317761224570THREADED ROD 4.8 M5X1M EZPPCS1 PCS á 1 ST
621111327317761224587THREADED ROD 4.8 M6X1M EZPPCS1 PCS á 1 ST
621111347317761224594THREADED ROD 4.8 M8X1M EZPPCS1 PCS á 1 ST
621111207317761224525THREADED ROD 4.8 M10X1M EZPPCS1 PCS á 1 ST
621111227317761224532THREADED ROD 4.8 M12X1M EZPPCS1 PCS á 1 ST
621111247317761224549THREADED ROD 4.8 M16X1M EZPPCS1 PCS á 1 ST
621111267317761224556THREADED ROD 4.8 M20X1M EZPPCS1 PCS á 1 ST