FIRE TAPE WRAP AROUND SEAL

Tape Wrap Around Seal (WAS) primarily consists of intumescent graphite strips that are protected by a plastic cover. The plastic cover is equipped with double-sided tape at one end for easy assembly during installation. The tape is also available on a 10 metre roll without the protective plastic cover. Wrap Around Seal Strip (WASS) is cut to the required length and is secured with tape during installation. When the tape is attacked by fire or temperatures above 120 °C its intumescent body expands quickly and effectively seals the collapsing plastic tube under high pressure.

In order to ensure the seal against all smoke gases, the gap between the tube and wall/floor should be sealed using FireStop Sealant3000 silicone adhesive or FireStop 400 acrylic sealant.
More information and safety data sheet available on essve.com

Read more about this product

General

  • Fire rated [EI]EI120
  • Application environmentOutdoors
  • Cable pipe penetrationPlastic pipe
  • EN-standardEN-1366-3

Area Of Use

Fire tape Wrap Around Seal (WAS) is used around plastic tubes type PVC, PE and ABS, etc. for water, sewage, central vacuum cleaners and the like that pass through fire cell separating building structures. The tape is cast into the existing building structures with concrete or similar product. The tape can ideally also be used for copper and steel pipes together with Armaflex and cables in bundles.

Description

Tape Wrap Around Seal (WAS) primarily consists of intumescent graphite strips that are protected by a plastic cover. The plastic cover is equipped with double-sided tape at one end for easy assembly during installation. The tape is also available on a 10 metre roll without the protective plastic cover. Wrap Around Seal Strip (WASS) is cut to the required length and is secured with tape during installation. When the tape is attacked by fire or temperatures above 120 °C its intumescent body expands quickly and effectively seals the collapsing plastic tube under high pressure.

In order to ensure the seal against all smoke gases, the gap between the tube and wall/floor should be sealed using FireStop Sealant3000 silicone adhesive or FireStop 400 acrylic sealant.
More information and safety data sheet available on essve.com

Item numberEANNamePackagePackage contentsBV
1008557317761086734WRAP AROUND SEAL (WAS) 40 MMPCS1 PCS á 1 ST
1008567317761087434WRAP AROUND SEAL (WAS) 55 MMPCS1 PCS á 1 ST
1008577317761087533WRAP AROUND SEAL (WAS) 82 MMPCS1 PCS á 1 ST
1008587317761087632WRAP AROUND SEAL (WAS) 110 MMPCS1 PCS á 1 ST
1008597317761087731WRAP AROUND SEAL (WAS) 125 MMPCS1 PCS á 1 ST
1008607317761087830WRAP AROUND SEAL (WAS) 140 MMPCS1 PCS á 1 ST
1008617317761087939WRAP AROUND SEAL (WAS) 160 MMPCS1 PCS á 1 ST
1008627317761088035WRAP AROUND SEAL (WAS) 200 MMPCS1 PCS á 1 ST
1008637317761088134WRAP AROUND SEAL STRIP (WASS)PCS1 PCS á 1 ST